Produkte

These plastic trim clips are used by Mazda, normally on exterior parts such as bumpers, grilles or radiator shields and guide.

These chunky plastic trim clips are used by Toyota on models such as the Mk3 RAV4 to attach the front grille. The clip expands when the centre in i...

These screw fit black plastic rivets are used on some Jaguar models. Typical fitments include for bumpers, arch linings or interior trim panels.

These cable ties are increasingly used on vehicles and for vehicle conversions. The edge clips are ideal on panels where mounting holes are unavail...

These cable ties are used to secure wiring looms and washer hose on vehicles across the Volkswagen group range. The clip fits onto the edge of a b...

These small black plastic trim clips are used on some Mitsubishi models to attach the plastic cowling that runs along the bottom of the windscreen.

These fasteners fit into a 6mm hole. When the centre pin is pushed or screwed in, the clip expands and holds securely in position. This type of cli...

These 7mm clips are normally used on the wheel arch linings or splashguards.

These push fit plastic rivets are used to clip on insulation, trim panels and shields. The clips are used on several modern Mercedes models but the...

A simple push-fit plastic rivet which expands and locks in position when the centre pin is inserted. These fasteners are used across the Lexus rang...

These plastic rivets are common on many different Ford vehicles from the Ranger to the Fusion. They are used in different places on different vehic...

This 8mm plastic fir tree clip is used on models such as the Mito. The clip is used to secure parts such as the tailgate lining.

This is a common interior trim panel fastener on modern Fiat cars. The clip is used to secure panels such as tailgate linings and other trims withi...

A simple to use, push fit fir tree clip used by Ford on parts such as tailgate linings. These clips hold tight in an 8mm diameter hole. They are us...

Diese cleveren Clips rasten ein und können mit einer Vierteldrehung des Schraubenkopfes gelöst werden. Sie eignen sich perfekt für Panels, bei dene...

Fitted to the Model 3, these clips are used to attach some of the underbody shields to the vehicle. The clip pushes into an 8mm hole and expands to...

These distinctive trim clips are used on bumpers, shields and undertrays. They fit into a 9mm hole and have a wide 33mm collar.

This small plastic clip is used on several Land Rover models to secure the insulation to the underside of the bonnet.

These pinch-to-fit clips are used to secure the bonnet insulation on most modern Jaguar models. It's also used on some interior carpets and sound d...

These clips are used by Land Rover to secure the bonnet release cable through the engine bay on several of their models including the new Defender ...

These are the plastic trim clips that are used to attach the sound deadening to the underside of the bonnet on the TT9 Ford Transit made between 20...

This is a common bonnet stay holder clip on Mazda vehicles. The bonnet support rod clips into this retainer when not in use. The clips can easily b...

These small black plastic trim clips are used by SEAT to attach trim covers such as the top bonnet trim to the SEAT Leon Mk2.

These plastic fasteners are used to secure brake lines in position. The clip connects the brake line to the chassis. This type of clip is used on s...

These small clips push into a 7mm hole and the fin lock the clip in place. They are typically used by Toyota for small, light trim panels such as a...

This nylon cable tie fit into a 6mm hole and can hold a maximum bundle diameter of 45mm.

These orange snap fit fascia clips are used to secure trim and covers onto the dashboard and centre console on many modern Toyota cars and vans. Th...

These light green plastic trim clips are used on some Mercedes models. The clip is used to attach trim panels such as door cards, tailgate linings ...

This white plastic trim fastener is used on some Mitsubishi models to secure parts including door cards, tailgate linings and pillar trims. The cli...

These are common on some older model Porsche cars. The clips have a crescent shaped head so they can be screwed onto the trim panel. They are used ...

These white trim clips are common on many modern cars. Jaguar use them to attach door cards, boot and tailgate linings as well as pillar trims. The...

These distinctive door card clips are used across the VW group including for Porsche. They are used on the Porsche 911 (997) and the Porsche 987 Ca...

These clips are used on some versions of the Ford Fiesta to attach front and rear door cards.

These distinctive green trim clips are used on the exterior pillars on many modern Mazda vehicles. The clips hold the lightweight plastic trim in p...

These white clips are used to attach exterior trim. An example fitment is for the side skirts and sill mouldings on the Jaguar XE (not including R-...

Used to secure exterior trim pieces such as tailgate trims and handle covers.

These yellow plastic trim clips are often used to secure exterior plastic trims to Toyota vehicles. Examples uses include fasteners tailgate mouldi...

These fir tree clips fit perfectly in Land Rover Defender headlinings. If the headlining is recovered or insulated and you need longer clips, these...

A standard dark grey fir tree clip used by Fiat on some vehicles for interior and exterior trims.

This very distinctive orange clip is one of the types used to attach the front and rear door cards into position on the 2nd generation Ford C-Max (...