Products

These high quality aftermarket parts are replacements for Fiat part number 60654116. These clips are normally used for securing trim panels such as...

These yellow trim clips are used to secure trim panels to the bodywork of the car. This part is mounted in the metal bodywork and a second part fit...

This plastic lock nut or expandable nut is extensively used by BMW. The part is used on most models since the 1990s and in a wide range of location...

Small, white plastic trim clips used to attach trim and mouldings to the bodywork on several modern Vauxhall vehicles. Each of the parts we provide...

identical specifications and equal in quality to the OE Toyota parts, these clips are a fraction of the cost. The clips are used to attach fabric i...

A simple push button clip used to retain the bonnet insulation and sound deadening fabric panels fitted to the underside of the bonnet.

These clips are 30mm wide and used on some older VW models. The more modern cars and vans use a smaller clip.

These clips are very widely used across the modern Volvo range. The clip is used to secure the under bonnet insulation in position. The clips pinch...

These simple trim clips are normally used to attach upholstered or fabric panels in position. In particular they are used by Mercedes to fasten the...

These fasteners are used to secure the upholstered sound deadening fitted to the underside of the bonnet. The clips are squeezed together to fit an...

Bonnet insulation is the sheet of fabric that is often fitted to the underside of the bonnet. On many Citroen cars and vans, this clip is used to s...

These are used on many different Toyota models to attach bonnet insulations, upholstery and trims. The plastic trim clip has an overall diameter of...

Used to secure the fabric sound insulation that is fitted to the underside of the bonnet on some Citroen cars and vans.

These clips squeeze together and then expand when released to hold firm. The clips are used on many modern Land Rover and Range Rover models to sec...

These barbed clips secure the fabric insulation panel that is mounted to the underside of the bonnet on some Peugeot cars and vans.

These 28mm round clips are used to attach the bonnet or hood insulation on many different models produced by Nissan and Infiniti. They can be fitte...

This small plastic clip is used on several Land Rover models to secure the insulation to the underside of the bonnet.

Mitsubishi bonnet insulation clips used to hold the fabric sound proofing panels in position on the underside of the bonnet. These clips fit into a...

These distinctive clips are used to hold bonnet insulation panels in place on a wide number of Nissan models. The barbed stem of the clip fits into...

These simple, black button clips fit into an 8mm diameter hole. The part is used by Mitsubishi to attach insulation and upholstery panels in severa...

These pinch-to-fit clips are used to secure the bonnet insulation on most modern Jaguar models. It's also used on some interior carpets and sound d...

These small plastic clips are used for attaching the rubber wind & weather seals to the bonnet opening on some Audi cars. The head of the clip ...

These small plastic clips are used for attaching the rubber wind & weather seals to the bonnet opening on some Seat models. The head of the cli...

These small plastic clips are used for attaching the rubber wind & weather seals to the bonnet opening on some Skoda cars. The head of the clip...

These small plastic clips are used for attaching the rubber wind & weather seals to the bonnet opening on some VW cars and commercial vehicles....

These clips are used by Land Rover to secure the bonnet release cable through the engine bay on several of their models including the new Defender ...

This small and distinctive black plastic trim clip is used to attach the rubber seal in place that runs along the front and rear of the bonnet. The...

These small brown clips are used on lots of Mitsubishi models. The clip is normally used to attach the rubber seals that run along the front and re...

Bonnet insulation fasteners suitable for almost all modern Hyundai cars. These are used across the Hyundai range to attach the sound deadening fabr...

These clips pinch together to fit and then expand into the holes when they are released. They are used to hold insulation to the underside of the b...

These are the plastic trim clips that are used to attach the sound deadening to the underside of the bonnet on the TT9 Ford Transit made between 20...

These clips are used on many different Alfa Romeo models to fasten upholstery and insulation. This part is very often used to attach the sound proo...

These are the clips used on most BMW cars to secure the under bonnet insulation. The clip is a simple button fastener that pushes in and clicks in ...

These are used to hold the fabric bonnet insulation sheets in position on the underside of the bonnet. They can get damaged or lost and this result...

These button clips are used to retain the sound deadening material that it fitted to the underside of the bonnet. They are used on most modern Mini...

These parts are used to fasten the fabric sound deadening to the underside of the bonnet on several different Honda models.

These clips are fitted to many Peugeot cars and vans. The bonnet prop rod is held in this clip when it is folded down and not in use. They are quit...

These clips are fitted to a lot of Citroen cars and vans. The bonnet prop rod is held in this clip when it is folded down and not in use. They are ...

A simple bonnet rod holder that maintains the stay in place when the bonnet is closed. The clip ensures the rod doesn't rattle and is safely out of...

This clip holds the bonnet support rod in place when the bonnet is closed. The clip keeps the rod in position and stops it rattling or being damage...

The plastic clip that is used to secure the bonnet stay in position when not in use. These parts can easily be damaged or broken which can result i...

These clips are used to hold the bonnet stay in position when the bonnet is closed and the stay is down. The clip holds the rod securely and stops ...

This is a common size of bonnet stay holder used on a number of Toyota cars. The plastic clip fits into a hole on or next to the landing / slam pan...

This is a common bonnet stay holder clip on Mazda vehicles. The bonnet support rod clips into this retainer when not in use. The clips can easily b...

These clips fit in a square 10mm x 10mm hole and are a very strong and sturdy bonnet rod holder. The clip takes an 8mm diameter bonnet rod. This de...

These clips fit in a square 10mm x 10mm hole and are a very strong and sturdy bonnet strut holder. The clip takes an 8mm diameter bonnet rod. This ...

This clip is fitted to some of the Vauxhall models that are made in partnership with Peugeot and Citroen. The clip is used to hold the bonnet stay ...