Toyota Car & Van Trim Clips, Fixings & Fasteners
Filter by Model
Filters
-
9mm Plastic Bumper & Trim Panel Clips- Toyota 52161-16010, 52161-02030
This type of clip is normally used on larger exterior panels such as bumpers, side skirts and radiator grilles. They are extremely common on Toyota...
View full details -
Wheel Arch Lining Push Nut / Grommet, Toyota 90189-06013
This clip pushes into an 8mm square hole and is normally used to hold flexible panels such as wheel arch linings and splash guards. The centre hole...
View full details -
7mm Plastic Rivet Clips for Toyota Engine Bay Covers & Shields- 9046707201
These are one of our best-selling Toyota clips. They are used on lots of different Toyota and Lexus models. Often used for engine bay shields, the ...
View full details -
Plastic Grommet for Wheel arches, Splashguards, Inner Wing and Bumpers- Toyota 90189-06013
These long plastic grommets are used to attach parts and trims to the metal bodywork on some Toyota models. They are used on several models normall...
View full details -
Small 5mm Push Fit Plastic Rivet For Bumpers, Grilles & Trim- Toyota 90467-05170
These tiny push fit plastic rivets are used on interior trims, bumpers, radiator grilles and for some shields on Toyota vehicles. They are also an ...
View full details -
7mm Push Fit Plastic Rivet, Toyota 90467-07215
These are common undertray, splash shield and wheel arch lining clips used on several modern Toyota models. The are used on the latest RAV4 as well...
View full details -
Black Wheel Arch Lining SEM Screw, Toyota 9015960496
These screws are common on Toyota cars and vans. The screws are often used on the wheel arch linings or splashguards. The screws have a captive was...
View full details -
7mm Push Fit Plastic Trim Clip, Toyota 90467-07214
There are several Toyota clips that all look quite similar to these. It's important to check the measurements and part number before you order. Eac...
View full details -
Toyota Plastic Trim Clips- Fasteners for Engine Covers, Shields & Trim Panels 90467-07211
These are used on many different Toyota and Lexus models. The clips are normally used on engine bay shields or engine covers.
-
Bonnet Insulation and Shield Trim Clip, Toyota 90467-09050
These are used on many different Toyota models to attach bonnet insulations, upholstery and trims. The plastic trim clip has an overall diameter of...
View full details -
Toyota Side Moulding, Sill Cover & Wheel Arch Flare Plastic Trim Clips- 75495-35010
Some models use a lot of these clips to attach the plastic protective mouldings that are fitted to the sides of the vehicles. There are normally a ...
View full details -
Toyota Side Moulding, Sill Cover & Wheel Arch Flare Plastic Trim Clips- 90904-67037
Some models use a lot of these clips to attach the plastic protective mouldings that are fitted to the sides of the vehicles. There are normally a ...
View full details -
Toyota Door Card & Interior Panel Trim Clips- 90467-10161
This interior trim panel clip is widely used by Japanese manufacturers. The clips are normally used on door cards but will also be found on boot li...
View full details -
7mm Push Fit Plastic Rivet, Toyota 9046707220
These plastic rivets fit into a 7mm hole. They are used on some Toyota vehicle to attach parts such as bumpers, wheel arch linings and underbody sh...
View full details -
Wing & Wheel Arch Lining Trim Clips, Toyota 53879-28010
A two-part clip that is used to attach the wheel arch lining to the wing on models including the Toyota IQ, RAV4, Previa and some models of the Ave...
View full details -
Plastic Arch Lining & Bumper Edge Clip, Toyota 90467-05114
These plastic nuts are used to join the edges of two panels. They are commonly used by Toyota to join the wheel arch lining to the edge of the whee...
View full details -
8mm Push Fit Plastic Trim Clip- Toyota 90467-08185
These short clips are normally used for fastening bumpers, grilles, sill moulding trims and radiator covers in place. The clips have a mottled fini...
View full details -
6mm Rubber Weatherstrip Seal Clip, Toyota 67867-12150
These plastic clips are used to attach rubber weatherstrip seals around apertures on the vehicle. The large head of the clip fits into a hole in th...
View full details -
Toyota Plastic Rivet Trim Clip- 90467-07041
This clip is widely used by Toyota. It has been for the last 30 years and continues to appear on new models. It can be found in a variety of locati...
View full details -
Body Side Moulding & Wheel Arch Flare Plastic Trim Clip- Toyota 75397-35010
This part is used for attaching exterior body moulding trim to several Toyota vehicles. The Toyota part number is 75397-35010 or 75395-35070 (witho...
View full details -
10mm Push Fit Plastic Rivet, Toyota SU00302984
This expanding plastic rivet is used on the Toyota GT-86 to attach parts such as the bumpers, under trays, wheel arches and some interior trim pane...
View full details -
7mm Push Fit Plastic Rivet, Toyota 9046707164
These clips fit into a 7mm hole. They simply push into the hole and expand to lock in position when the centre pin is inserted. This clip is used b...
View full details -
Trim Panel & Moulding Trim Clips, Toyota 90467-09206, SU003-02969
A standard hidden trim clip suitable for mounting panels such as door cards, tailgate linings and pillar trims. Each clip comes with a sealing wash...
View full details -
9x9mm Screw Grommet, Toyota 90189-06029
These plastic lock nuts, lokuts or screw grommets fit into a square 9mm x 9mm hole. Each one includes a foam sealing washer. They are identical to ...
View full details -
8mm Wheel Arch Liner / Inner Wing Trim Clips- Toyota SU003-02989
These clips have a 7.7mm diameter shaft and are used in the wheel arch lining on some Toyota models including the GT86. The clip is an expanding pu...
View full details -
Wheel Arch Liner Clip, Moulding Clip, Bodywork Fastener Grommet Toyota Lexus- 9018906157
Plastic clip that is used to retain shields and linings normally around the wheel arches. The clips can also be used as screw grommets and so are o...
View full details -
Toyota Exterior Moulding Clip- 90904-67036
This distinctive clip is one of many different coloured body moulding clips used by Toyota. The wide range of clips are all different sizes or with...
View full details -
Plastic Grommet for Wheel arches, Splashguards and Bumper trims- Toyota 90189-06028
These long plastic grommets are used to attach parts and trims to the metal bodywork on some Toyota models. They are used on several models normall...
View full details -
9mm Bumper, Spoiler, Grill, Arch & Sideskirt Clips- Toyota 52161-20010
These are fitted to many different Toyota cars and vans. They are used on bumpers, side skirts, radiator grilles, spoilers, undertrays and engine s...
View full details -
Toyota 7mm Plastic Rivet Trim Clip- Splashguards, Trims & Shields 90467-07166
These are a 7mm standard push fit rivet that expands and locks when the centre pin is pushed in. They are used on several different Toyota models i...
View full details -
5mm Plastic Screw Fit Rivet Rivet Clip, Toyota 90467-05063C0
This small screw fit plastic rivet fits into a 5mm hole and is used on many different Toyota cars. The clip is normally used for small trim panels ...
View full details -
Side Skirt & Sill Moulding Clips- Toyota 76924-13020
These plugs are used on the underside of side skirts and sill covers fitted to many different Toyota models including some versions of the RAV4, La...
View full details -
7mm Push Fit Plastic Rivet, Toyota 90467-07076-C0
These are used on many Toyota models to secure small or lightweight trim panels such as windscreen cowls, pillar trim covers, boot lining panels an...
View full details -
6.5mm Push Fit Plastic Fastener Clip, Toyota 904670707122
These small expanding plastic fasteners are used to accurately secure lightweight trim panels or corner pieces. They are used on parts such as bump...
View full details -
8mm Trim Clip for Bumpers, Splashguards, Liners- Toyota 90044-68320
These 8mm plastic trim clips are typically used to attach wheel arch lining, bumpers, grilles and underbody shields. The clip is a plastic rivet th...
View full details -
Toyota Push Fit Plastic Rivet Trim Clip- Wheel Arch Lining & Splashguards- 90467-10183
Most often used by Toyota on wheel arch linings and shields, these clips are just a simple plastic rivet that can be used on all sorts of trims ins...
View full details -
Bumper, Wheel Arch & Exterior Trim Clips, Toyota 75392-35200
These distinctive blue moulding clips are fitted to several newer Toyota vehicles including the Mk3 Yaris, C-HR and the Mk3 RAV4. They are common o...
View full details -
10mm Bumper & Undertray Plastic Trim Clip- Toyota 51454-48010
This parts are common on several models of the Yaris to secure the undertray and bumper. They are also used on some Lexus models and are interchang...
View full details -
9mm Push Fit Plastic Rivet Clip, Toyota 9046709227
These plastic rivets are a replacement for Toyota part number 90467-09227. The clip has a grey centre pin and they are normally used on the undersi...
View full details -
Bumper Retainer Clip / Fastener, Toyota 7539235220
These white fasteners are used to secure the bumper alignment. They can often be snapped in a collision or become brittle as they age. They are an ...
View full details -
Toyota Plastic Fastener Clip for Rubber Bonnet Seal- 90467-08011
These small clips are used along the inner edge of the bonnet tip or base to attach the rubber seal. They are used on a number of different Toyota ...
View full details -
Toyota Interior & Exterior Moulding Trim Clip- 90467-10162
This trim panel clip is very widely used by Toyota on interior trim panels such as the pillar trims, sill mouldings and boot linings.
-
7mm Push Fit Plastic Trim Clip- Toyota 90467-07043-C0
A standard push fit expanding plastic rivet which can be used for interior trim panels, dashboards, boot linings etc. The clip is used on many diff...
View full details -
Plastic Spire Clips for Wheel Arch Lining Trims- Toyota 5387914010
These clips are extremely common across the Toyota range. The clips are normally used around the edges of the wheel arch. They mount onto the wing ...
View full details -
Screw Grommet / Plastic Expanding Nut- Toyota 90189-06010
These are a standard screw grommet used to attach parts or trims onto metal bodywork without having to screw directly into the metal.
-
Screw Grommet for Toyota Cars, 90189-06211
These are used on a number of different Toyota cars from the Auris to the Avensis and up the Lexus LFA. They can be used in many different location...
View full details -
Front Bumper, Bonnet, Radiator Grille Rubber Seal Clips- Toyota 53145-60030
These little clips are used to attach the rubber seal strip that runs along the top of the radiator grille near the bonnet catch. The strip reduces...
View full details -
Wheel Arch Trim & Side Moulding Clips- Toyota 75492-60020
One of many clips used for attaching the side mouldings and trims on to various Toyota models including the Land Cruiser Prado. There are a lot of ...
View full details