Products

This is common clip used by Subaru on a large number of their cars. The clip is found on cowls, shields, fender and fairing covers, wheel arch lini...

This is common clip used by Toyota on many different models of car. The clip is used for a wide range of fittings including cowls, shields, fender ...

These are used on the Vauxhall/ Opel Brava, Monterey and the Isuzu TF / Faster. The clip is used in a number of places. This type of screw fit plas...

Often used on wheel arch linings or splash guards, these clips are also fitted to upholstery panels such as boot linings and bonnet insulation.

These black fir tree clips fit into a 7mm hole. The plastic clips are used on cars such as the Ford Mondeo, Focus or Fiesta. The fastener is normal...

These single use 7mm black fir tree clips are used by Audi on several different models. The clips are black with a 20mm diameter head. They are use...

These single use 7mm black fir tree clips are used by Seat on several different models. The clips are black with a 20mm diameter head. They are use...

These single use 7mm black fir tree clips are used by VW on several different models. The clips are black with a 20mm diameter head. They are used ...

This clip is used on some Peugeot cars and vans to secure trim panels and upholstery. Typical uses include boot carpet lining, bonnet soundproofing...

This wide collared 7mm screw fit clip is used on some Toyota models to secure panel in position. This can include seat backs and bases, boot lining...

These 7mm plastic trim clips are used by Subaru on a number of different models including the Forester, Impreza, Legacy and BRZ. The clips fit into...

This clip fits into a 7mm hole and expands when the centre pin is inserted.

These black fir tree clips are common on lots of Honda models but do originally come in a wide range of colours. These are black, fit into a 7mm ho...

These fir tree clips are used on interior and exterior panels including windscreen cowls, boot linings and bonnet insulation panels.

These fir tree clips fit a 7mm hole and are used by Fiat on many different vehicles. Typical uses include bonnet insulation and sound deadening pan...

This long fir tree clip fits into a 7mm hole. The clip is used on many different BMW models to secure the seat backs onto the frame. It is also use...

These single use 7mm black fir tree clips are used by Skoda on several different models. They are used as Skoda Octavia luggage compartment trim cl...

These black fir tree clips are used on all models of the Land Rover Defender from 1987 onwards. They are used as the bumper end cap clips and also ...

These grey fir tree clips are a perfect for for the headlining of the Land Rover Defender, P38 Range Rover and Discovery 1 and 2. We also have them...

This wide collared trim is used on loose fitting trims and insulation panels. It is common on interior carpet linings, hood insulations and other i...

Fitted to the Citroen C1, these clips are normally used by Toyota. These cars were designed and manufactured with Toyota and so some parts are now ...

These are one of our best-selling Toyota clips. They are used on lots of different Toyota and Lexus models. Often used for engine bay shields, the ...

These 7mm plastic rivets are used on some modern Toyota models. In particular they are the Toyota RAV4 front grill clips (Mk4 2013-2018). The clips...

This is an equivalent to the Jaguar part C2S9354020. The screw rivet fits into a 6.5mm hole. When the centre pin is pushed in, the clip expands to ...

These clips are used to attach various trim and protective panels in and around the engine bay and underside of the car. They are quite distinctive...

These small, 7mm black plastic trim clips are used by Toyota on a number of different cars. The clips are a standard push-fit plastic rivet style f...

A standard and simple 7mm push fit black plastic rivet. These simple clips expand when the centre is pushed in and the clips lock in position. This...

These wide collared plastic push fit trim clips are used on some of the latest Alfa Romeo models including the Stelvio and the Giulia. The clips ar...

These 7mm clips are normally used on the wheel arch linings or splashguards.

These push fit plastic rivets are used to clip on insulation, trim panels and shields. The clips are used on several modern Mercedes models but the...

These are one of our best-selling Lexus clips. They are used on lots of different Toyota and Lexus models. Often used for engine bay shields, the t...

These simple push fit plastic rivets expand to lock in position when the centre pin is inserted. They are used by Volvo on several models. A common...

A simple push fit plastic rivet that expands when the centre pin is pushed in. To remove the clip, push the centre pin through further and the clip...

This is common wheel arch lining, engine shield and side skirt clip used by Suzuki on models such as the Swift and Jimny. The clip fits into a 7mm ...

These are used on many Toyota models to secure small or lightweight trim panels such as windscreen cowls, pillar trim covers, boot lining panels an...

These are common undertray, splash shield and wheel arch lining clips used on several modern Toyota models. The are used on the latest RAV4 as well...

These clips fit into a 7mm hole. They simply push into the hole and expand to lock in position when the centre pin is inserted. This clip is used b...

These plastic rivets fit into a 7mm hole. They are used on some Toyota vehicle to attach parts such as bumpers, wheel arch linings and underbody sh...

These are more commonly found on Toyota cars but are also used by Citroen on vehicles that they have produced in collaboration with the Japanese ca...

These are a standard 8mm push fit plastic trim clip used on several Nissan models. The Nissan equivalent part number is 63848-01G00 or 01553-08541

These are more commonly found on Toyota cars but are also used by Peugeot on vehicles that they have produced in collaboration with the Japanese ca...

Fitted to the Peugeot 107 and 108, these clips are normally used by Toyota. These cars were designed and manufactured with Toyota and so some parts...

A simple push-fit plastic rivet which expands and locks in position when the centre pin is inserted. These fasteners are used across the Lexus rang...

These 7mm plastic rivets are typically used on trim such as windscreen cowls, engine bay shields and parts such as the air intake. The part is also...

A simple 7mm push fit used on different types of trim panel and mouldings by Mitsubishi.

There are several Toyota clips that all look quite similar to these. It's important to check the measurements and part number before you order. Eac...

A standard push fit expanding plastic rivet which can be used for interior trim panels, dashboards, boot linings etc. This 7mm clip is used by Niss...

A standard push fit expanding plastic rivet which can be used for interior trim panels, dashboards, boot linings etc. The clip is used on many diff...