Audi A6 Fixings Trim Clips and Fasteners -Mk3 C6 (2004-2011)

These star or Torx head screws are a suitable replacement for the parts used on many Audi cars to secure the front and rear wheel arch linings or s...

These are one of several types and sizes of screw grommet fitted to most modern Audi cars. They are used for mounting anything from number plates t...

These are used on a lot of Audi models. The parts are normally used as Audi undertray clips for attaching protective panels on the underside of the...

These small plastic fasteners are used on the inner wing lining on a large number of Audi vehicles. The clip is used in conjunction with a metal T-...

These clips fit into a retainer on the trim or door card. When the trim is then located and pushed onto the bodywork, these clips lock in place and...

These black, folding plastic clips are used around the edges of the wing and wheel arch lining on many different Audi cars. The clips are quite unu...

A common screw grommet fitted to many Audi vehicles. The clip is used throughout and example uses are wheel arch linings, pillar trims, door cards,...

These clips are used to lock twist lock bolts in place. This is the retainer that the key of the bolt pushes into and then turns to lock in place. ...

This plastic clip twists 90 degrees to lock in place. It is used on the underbody shields and engine undertrays on at least 3 different Audi models...

This is a very common part used on a wide range of vehicles all related to the Volkswagen Group. The clip is used for a variety of purposes from at...

A simple plastic trim clip that expands when the centre pin is inserted. This type of clip is used on many vehicle and has lots of different uses. ...

This sprung clip is very simple. The clip squeezes together to be fitted and expands once it is in place. Most Audi vehicles use these to fasten bo...

A very common 16mm long black metal spring clip used for attaching fascias, pillar covers and interior trims. The fastener is common on a wide rang...

These 6mm scrivets or screw fit plastic rivets have a Torx head and are used by Audi on a number of different vehicles. The plastic clip is fitted ...

A popular 8mm push pin rivet that is used on some Audi cars to attach splashguards, bumper covers and engine bay covers.

A push fit plastic clip that is used to secure the weatherstrip in position on some older Audi vehicles.

Small black metal clips which are used to secure the trim strips onto the door cards on some modern Audi cars.