Mazda 3 Fixings Trim Clips and Fasteners -BM / BN (2013-2018)

Below you can find a list of some of the trim clips and fasteners that we keep in stock for the Mazda 3 BM / BN (2013-2018). We have tried to list the parts under subheadings which indicate the location they are used. Please note that there may be other clips used which we do not stock and which are not shown. If you need something specific for your 3 and you can't find it, just let us know and we'll try to help or suggest an alternative.

Show
24
36
48

View as

Bonnet Insulation and Soundproofing

Mazda Bonnet Insulation & Soundproofing Clips, Mazda TD1156694

These fir tree clips are used to secure the under bonnet sound proofing insulation on most Mazda cars since around 2003. The clips fit in a 5.5mm h...
View full details

Bonnet Rubber Weatherstrip

Yellow Rubber Door Seal & Weatherstrip Clips, Mazda BC1D58762

These yellow weatherstrip clips are fitted to most Mazda cars since 2000. The small clips fit inside the rubber seals that run around the doors, bo...
View full details
Plastic Button Clips for Rubber Weatherstrips, Mazda J00156741

This clip is used by Mazda to secure the rubber seal that runs along the front or rear side of the bonnet. It's used on most modern Mazda cars incl...
View full details

Bonnet Strut or Stay Rod Holder

Bonnet Strut Stay Rod Holder, Mazda L20656652A

This is a common bonnet stay holder clip on Mazda vehicles. The bonnet support rod clips into this retainer when not in use. The clips can easily b...
View full details

Boot Carpet and Interior Lining

6mm Interior Trim Fastener Clips for Trim Panels, Fascias & Linings Mazda- B46768AC3

These small, black 6mm clips have a wide collar and are common on interior trims and panels. They are often used on boot linings, upholstery, roof ...
View full details
Mazda Door Card & Interior Panel Trim Clips- GE4T68865A

This interior trim panel clip is widely used by Mazda. The clips are normally used on door cards but will also be found on boot linings, pillar tri...
View full details

Centre Console Trim Fastener

6mm Interior Trim Fastener Clips for Trim Panels, Fascias & Linings Mazda- B46768AC3

These small, black 6mm clips have a wide collar and are common on interior trims and panels. They are often used on boot linings, upholstery, roof ...
View full details

Dashboard and Fascia Trim

Interior Trim Panels and Covers Clips, Mazda S47P64345

This part is normally used on interior panels that sit flush against the dashboard or centre console. These trims are sometimes decorative or are u...
View full details

Engine Bay Shield

6mm Interior Trim Fastener Clips for Trim Panels, Fascias & Linings Mazda- B46768AC3

These small, black 6mm clips have a wide collar and are common on interior trims and panels. They are often used on boot linings, upholstery, roof ...
View full details

Front Bumper and Trim Fastener

8mm Push Fit Bumper, Arch Lining & Undertray Clip, Mazda B45A56146A

This is probably the most common Mazda clip we sell. These are fitted to almost all modern Mazda cars produced since 2010. The clips fit into an 8m...
View full details
Plastic Bumper Clips for Mazda Cars- Front, Rear Bumper Trim & Grille Rivet- GD7A50EA1

Common on several Mazda models, these clips are normally used on bumpers undertrays, sill mouldings or other large panels and shields.
5mm Screw Fit Plastic Trim Clips, Mazda Bumper Fasteners EA0150037

Normally found on Mazda front or rear bumpers, these plastic fasteners expand when the centre pin is pushed in. They fit into a 5mm hole. The clips...
View full details
Undertray, Bumper & Wheel Arch Screw Grommet, Mazda B45556135

Sometimes known as chimney nuts or spire clips, these grey plastic clips are used to join trims and panels. These are used on many different Mazda ...
View full details
Screw Mount Clips for Bumpers & Undertrays, Mazda C27450133

These grey screw edge grommets or spire clips are used to join parts without necessitating damage to the metal bodywork. This part slides over the ...
View full details

Front Door Card

Interior Door Card & Trim Panel Clips, Mazda GJ6R68ABX / GJ6A68AB1

These interior door card clips are used on a wide range of Mazda cars to hold the interior door cards in place. Our clips include the foam sealing ...
View full details

Front Wheel Arch Lining and Mudguard

8mm Push Fit Bumper, Arch Lining & Undertray Clip, Mazda B45A56146A

This is probably the most common Mazda clip we sell. These are fitted to almost all modern Mazda cars produced since 2010. The clips fit into an 8m...
View full details

Interior Pillar Trim

Mazda Door Card & Interior Panel Trim Clips- GE4T68865A

This interior trim panel clip is widely used by Mazda. The clips are normally used on door cards but will also be found on boot linings, pillar tri...
View full details

Radiator Surround and Air Guide Panel

Plastic Bumper Clips for Mazda Cars- Front, Rear Bumper Trim & Grille Rivet- GD7A50EA1

Common on several Mazda models, these clips are normally used on bumpers undertrays, sill mouldings or other large panels and shields.
10mm Push Fit Plastic Fastener, Mazda KD4550EA1

These plastic trim clips are used by Mazda, normally on exterior parts such as bumpers, grilles or radiator shields and guide.

Rear Bumper and Trim Fastener

5mm Screw Fit Plastic Trim Clips, Mazda Bumper Fasteners EA0150037

Normally found on Mazda front or rear bumpers, these plastic fasteners expand when the centre pin is pushed in. They fit into a 5mm hole. The clips...
View full details

Rear Door Card

Interior Door Card & Trim Panel Clips, Mazda GJ6R68ABX / GJ6A68AB1

These interior door card clips are used on a wide range of Mazda cars to hold the interior door cards in place. Our clips include the foam sealing ...
View full details

Rear Wheel Arch Lining and Mudguard

8mm Push Fit Bumper, Arch Lining & Undertray Clip, Mazda B45A56146A

This is probably the most common Mazda clip we sell. These are fitted to almost all modern Mazda cars produced since 2010. The clips fit into an 8m...
View full details
Undertray, Bumper & Wheel Arch Screw Grommet, Mazda B45556135

Sometimes known as chimney nuts or spire clips, these grey plastic clips are used to join trims and panels. These are used on many different Mazda ...
View full details

Side Skirt, Sill Moulding Cover Trim

Mazda Side Skirt Clips & Side Moulding Clips- G18K51SJ3

A common clip used by Mazda for attaching side skirts, sill mouldings and other plastic trims around the vehicle. These are very common on side ski...
View full details
Plastic Trim Clips for Mazda Side Skirts Sill Moulding- BP4L51SJ3

These chunky and strong clips and used on the sills of several different Mazda models. The clips are used to fasten the side skirts or plastic sill...
View full details

Tailgate Lining Clips and Boot Lid Lining

6mm Interior Trim Fastener Clips for Trim Panels, Fascias & Linings Mazda- B46768AC3

These small, black 6mm clips have a wide collar and are common on interior trims and panels. They are often used on boot linings, upholstery, roof ...
View full details
Interior Trim Panels and Covers Clips, Mazda S47P64345

This part is normally used on interior panels that sit flush against the dashboard or centre console. These trims are sometimes decorative or are u...
View full details
Tailgate Lining & Interior Trim Clips, Mazda KD4568865

These green plastic clips look different before they are fitted as they have a washer that forms part of the mould. During installation, the washer...
View full details

Underbody Shields and Insulation Panel Fastener

8mm Push Fit Bumper, Arch Lining & Undertray Clip, Mazda B45A56146A

This is probably the most common Mazda clip we sell. These are fitted to almost all modern Mazda cars produced since 2010. The clips fit into an 8m...
View full details
Plastic Bumper Clips for Mazda Cars- Front, Rear Bumper Trim & Grille Rivet- GD7A50EA1

Common on several Mazda models, these clips are normally used on bumpers undertrays, sill mouldings or other large panels and shields.
8mm Push Fit Plastic Rivet, Mazda BGV4-56-145

Very common across the Mazda range, this clip is used to fasten and secure a wide variety of parts. Uses include Mazda MX-5 sideskirt clips, CX-3 b...
View full details

Windscreen Cowl or Scuttle Panel

8mm Push Fit Plastic Rivet, Mazda BGV4-56-145

Very common across the Mazda range, this clip is used to fasten and secure a wide variety of parts. Uses include Mazda MX-5 sideskirt clips, CX-3 b...
View full details