Mazda CX-5 Fixings Trim Clips and Fasteners -Mk2 (2018-)
Bonnet Insulation and Soundproofing
-
Mazda Bonnet Insulation & Soundproofing Clips, Mazda TD1156694
These fir tree clips are used to secure the under bonnet sound proofing insulation on most Mazda cars since around 2003. The clips fit in a 5.5mm h...
View full details
Bonnet Rubber Weatherstrip
-
Yellow Rubber Door Seal & Weatherstrip Clips, Mazda BC1D58762
These yellow weatherstrip clips are fitted to most Mazda cars since 2000. The small clips fit inside the rubber seals that run around the doors, bo...
View full details -
Plastic Button Clips for Rubber Weatherstrips, Mazda J00156741
This clip is used by Mazda to secure the rubber seal that runs along the front or rear side of the bonnet. It's used on most modern Mazda cars incl...
View full details
Bonnet Strut or Stay Rod Holder
-
Bonnet Strut Stay Rod Holder, Mazda L20656652A
This is a common bonnet stay holder clip on Mazda vehicles. The bonnet support rod clips into this retainer when not in use. The clips can easily b...
View full details
Boot Carpet and Interior Lining
-
6mm Interior Trim Fastener Clips for Trim Panels, Fascias & Linings Mazda- B46768AC3
These small, black 6mm clips have a wide collar and are common on interior trims and panels. They are often used on boot linings, upholstery, roof ...
View full details -
Tailgate Lining & Interior Trim Clips, Mazda KD4568865
These green plastic clips look different before they are fitted as they have a washer that forms part of the mould. During installation, the washer...
View full details
Dashboard and Fascia Trim
-
Interior Trim Panels and Covers Clips, Mazda S47P64345
This part is normally used on interior panels that sit flush against the dashboard or centre console. These trims are sometimes decorative or are u...
View full details
Engine Bay Shield
-
6mm Interior Trim Fastener Clips for Trim Panels, Fascias & Linings Mazda- B46768AC3
These small, black 6mm clips have a wide collar and are common on interior trims and panels. They are often used on boot linings, upholstery, roof ...
View full details
Exterior Pillar Trim Fastener
-
Exterior Pillar Trim Garnish Cover Clip, Mazda KD5350M38
These distinctive green trim clips are used on the exterior pillars on many modern Mazda vehicles. The clips hold the lightweight plastic trim in p...
View full details
Front Bumper and Trim Fastener
-
8mm Push Fit Bumper, Arch Lining & Undertray Clip, Mazda B45A56146A
This is probably the most common Mazda clip we sell. These are fitted to almost all modern Mazda cars produced since 2010. The clips fit into an 8m...
View full details -
Screw Mount Clips for Bumpers & Undertrays, Mazda C27450133
These grey screw edge grommets or spire clips are used to join parts without necessitating damage to the metal bodywork. This part slides over the ...
View full details -
8mm Push Fit Plastic Rivet Bumper Clip, Mazda FD0168AC3
These long grey expanding push fit clips are unusual in that they only expand at the very tip. They are used by Mazda on front bumpers and some doo...
View full details
Front Door Card
-
Interior Door Card & Trim Panel Clips, Mazda GJ6R68ABX / GJ6A68AB1
These interior door card clips are used on a wide range of Mazda cars to hold the interior door cards in place. Our clips include the foam sealing ...
View full details
Front Door Weatherstrip
-
Yellow Rubber Door Seal & Weatherstrip Clips, Mazda BC1D58762
These yellow weatherstrip clips are fitted to most Mazda cars since 2000. The small clips fit inside the rubber seals that run around the doors, bo...
View full details
Front Grille or Slam Panel
-
Plastic Bumper Clips for Mazda Cars- Front, Rear Bumper Trim & Grille Rivet- GD7A50EA1
Common on several Mazda models, these clips are normally used on bumpers undertrays, sill mouldings or other large panels and shields.
Front Wheel Arch Flare and Trim Moulding
-
8mm Push Fit Bumper, Arch Lining & Undertray Clip, Mazda B45A56146A
This is probably the most common Mazda clip we sell. These are fitted to almost all modern Mazda cars produced since 2010. The clips fit into an 8m...
View full details
Front Wheel Arch Lining and Mudguard
-
8mm Push Fit Bumper, Arch Lining & Undertray Clip, Mazda B45A56146A
This is probably the most common Mazda clip we sell. These are fitted to almost all modern Mazda cars produced since 2010. The clips fit into an 8m...
View full details
Interior Pillar Trim
-
Tailgate Lining & Interior Trim Clips, Mazda KD4568865
These green plastic clips look different before they are fitted as they have a washer that forms part of the mould. During installation, the washer...
View full details
Radiator Surround and Air Guide Panel
-
Plastic Bumper Clips for Mazda Cars- Front, Rear Bumper Trim & Grille Rivet- GD7A50EA1
Common on several Mazda models, these clips are normally used on bumpers undertrays, sill mouldings or other large panels and shields.
Rear Bumper and Trim Fastener
-
8mm Push Fit Bumper, Arch Lining & Undertray Clip, Mazda B45A56146A
This is probably the most common Mazda clip we sell. These are fitted to almost all modern Mazda cars produced since 2010. The clips fit into an 8m...
View full details
Rear Door Card
-
Interior Door Card & Trim Panel Clips, Mazda GJ6R68ABX / GJ6A68AB1
These interior door card clips are used on a wide range of Mazda cars to hold the interior door cards in place. Our clips include the foam sealing ...
View full details
Rear Door Weatherstrip
-
Yellow Rubber Door Seal & Weatherstrip Clips, Mazda BC1D58762
These yellow weatherstrip clips are fitted to most Mazda cars since 2000. The small clips fit inside the rubber seals that run around the doors, bo...
View full details
Rear Wheel Arch Flares and Moulding Trim
-
8mm Push Fit Bumper, Arch Lining & Undertray Clip, Mazda B45A56146A
This is probably the most common Mazda clip we sell. These are fitted to almost all modern Mazda cars produced since 2010. The clips fit into an 8m...
View full details
Rear Wheel Arch Lining and Mudguard
-
8mm Push Fit Bumper, Arch Lining & Undertray Clip, Mazda B45A56146A
This is probably the most common Mazda clip we sell. These are fitted to almost all modern Mazda cars produced since 2010. The clips fit into an 8m...
View full details -
Screw Mount Clips for Bumpers & Undertrays, Mazda C27450133
These grey screw edge grommets or spire clips are used to join parts without necessitating damage to the metal bodywork. This part slides over the ...
View full details
Tailgate Lining Clips and Boot Lid Lining
-
6mm Interior Trim Fastener Clips for Trim Panels, Fascias & Linings Mazda- B46768AC3
These small, black 6mm clips have a wide collar and are common on interior trims and panels. They are often used on boot linings, upholstery, roof ...
View full details -
Interior Trim Panels and Covers Clips, Mazda S47P64345
This part is normally used on interior panels that sit flush against the dashboard or centre console. These trims are sometimes decorative or are u...
View full details -
Tailgate Lining & Interior Trim Clips, Mazda KD4568865
These green plastic clips look different before they are fitted as they have a washer that forms part of the mould. During installation, the washer...
View full details
Underbody Shields and Insulation Panel Fastener
-
8mm Push Fit Bumper, Arch Lining & Undertray Clip, Mazda B45A56146A
This is probably the most common Mazda clip we sell. These are fitted to almost all modern Mazda cars produced since 2010. The clips fit into an 8m...
View full details -
Plastic Bumper Clips for Mazda Cars- Front, Rear Bumper Trim & Grille Rivet- GD7A50EA1
Common on several Mazda models, these clips are normally used on bumpers undertrays, sill mouldings or other large panels and shields.
-
8mm Push Fit Plastic Rivet, Mazda BGV4-56-145
Very common across the Mazda range, this clip is used to fasten and secure a wide variety of parts. Uses include Mazda MX-5 sideskirt clips, CX-3 b...
View full details -
Screw Mount Clips for Bumpers & Undertrays, Mazda C27450133
These grey screw edge grommets or spire clips are used to join parts without necessitating damage to the metal bodywork. This part slides over the ...
View full details
Windscreen Cowl or Scuttle Panel
-
8mm Push Fit Plastic Rivet, Mazda BGV4-56-145
Very common across the Mazda range, this clip is used to fasten and secure a wide variety of parts. Uses include Mazda MX-5 sideskirt clips, CX-3 b...
View full details