Mitsubishi ASX Fixings Trim Clips and Fasteners -(2010-2018)
Bonnet Insulation and Soundproofing
-
Bonnet Insulation Retaining Clip / Fastener, Mitsubishi MU001282
Mitsubishi bonnet insulation clips used to hold the fabric sound proofing panels in position on the underside of the bonnet. These clips fit into a...
View full details
Bonnet Rubber Weatherstrip
-
Bonnet Rubber Weatherstrip Seal Clips, Mitsubishi MU481027
These small brown clips are used on lots of Mitsubishi models. The clip is normally used to attach the rubber seals that run along the front and re...
View full details
Boot Carpet and Interior Lining
-
Mitsubishi Door Card & Interior Panel Trim Clips- MR550882
This interior trim panel clip is widely used by Japanese manufacturers including Mitsubishi. The clips are normally used on door cards but will als...
View full details -
7mm Push Fit Plastic Rivets, Mitsubishi MB476821 Trim & Panel Clips
A simple 7mm push fit used on different types of trim panel and mouldings by Mitsubishi.
Dashboard and Fascia Trim
-
6mm Push Fit Plastic Trim Clips for Mitsubishi - MR288150, MR655523
Small 6mm push fit clips used by Mitsubishi on a wide range of models. These are one of the most common Mitsubishi clips we stock and have been fit...
View full details -
8mm Plastic Rivet Trim Clips for Bumpers Splashguards- Mitsubishi MR328954
These are a very common clip used by a lot of different Japanese and European manufacturers. They fit into an 8mm hole and are used by Mitsubishi f...
View full details
Front Bumper and Trim Fastener
-
6mm Push Fit Plastic Trim Clips for Mitsubishi - MR288150, MR655523
Small 6mm push fit clips used by Mitsubishi on a wide range of models. These are one of the most common Mitsubishi clips we stock and have been fit...
View full details -
Screw Mounting Grommet for 8.5x8.5mm Hole, Mitsubishi MS480003
Very widely used screw grommet that fits into a square hole measuring 8.5mm by 8.5mm. The clip is used by Mitsubishi to secure trim or parts to bod...
View full details
Front Door Card
-
Mitsubishi Door Card & Interior Panel Trim Clips- MR550882
This interior trim panel clip is widely used by Japanese manufacturers including Mitsubishi. The clips are normally used on door cards but will als...
View full details
Front Door Weatherstrip
-
Front & Rear Door Rubber Weatherstrip Clips, Mitsubishi MU000255
These small white clips have a canoe shaped head that fits inside a rubber door seal. The clip then clicks into position on the door frame to secur...
View full details
Front Wheel Arch Lining and Mudguard
-
6mm Push Fit Plastic Trim Clips for Mitsubishi - MR288150, MR655523
Small 6mm push fit clips used by Mitsubishi on a wide range of models. These are one of the most common Mitsubishi clips we stock and have been fit...
View full details -
8mm Push Fit Trim Clip, Mitsubishi MU488006
These 8mm plastic rivets are used on several modern Mitsubishi vehicles. The clips are a simple expanding push fit clip. The clip goes into an 8mm ...
View full details -
8mm Plastic Rivet Trim Clips for Bumpers Splashguards- Mitsubishi MR328954
These are a very common clip used by a lot of different Japanese and European manufacturers. They fit into an 8mm hole and are used by Mitsubishi f...
View full details
Interior Pillar Trim
-
Mitsubishi Door Card & Interior Panel Trim Clips- MR550882
This interior trim panel clip is widely used by Japanese manufacturers including Mitsubishi. The clips are normally used on door cards but will als...
View full details
Interior Wing Mirror Trim or Tweeter Cover
-
Body Moulding & Trim Panel Clips, Mitsubishi MU000588, MU000977
These short blue moulding clips are used on interior and exterior trim panels. The clips are used on several different models for parts such as pil...
View full details
Rear Bumper and Trim Fastener
-
9mm Push Fit Plastic Clips for Bumpers, Undertray, Sills & Grille- Mitsubishi MR200300
These 9mm push fit rivets are used on several Mitsubishi models including the Mitsubishi Lancer Evolution models 8, 9 and 10. They are used for att...
View full details -
8mm Push Fit Trim Clip, Mitsubishi MU488006
These 8mm plastic rivets are used on several modern Mitsubishi vehicles. The clips are a simple expanding push fit clip. The clip goes into an 8mm ...
View full details -
9mm Hole Screw Grommet, Mitsubishi MU480033 / MU480035
These are used to mount the bumpers on several Mitsubishi models. This part fits into a hole in the metal bodywork and the plastic bumper cover is ...
View full details
Rear Door Card
-
Mitsubishi Door Card & Interior Panel Trim Clips- MR550882
This interior trim panel clip is widely used by Japanese manufacturers including Mitsubishi. The clips are normally used on door cards but will als...
View full details
Rear Door Weatherstrip
-
Front & Rear Door Rubber Weatherstrip Clips, Mitsubishi MU000255
These small white clips have a canoe shaped head that fits inside a rubber door seal. The clip then clicks into position on the door frame to secur...
View full details
Rear Wheel Arch Lining and Mudguard
-
Wheel Arch Lining, Bumper & Trim Panel Fasteners- Mitsubishi MB253964
Fitted to several Mitsubishi models, these clips are used for multiple purposes. They are found on wheel arch linings, bumpers, splashguards and in...
View full details -
8mm Plastic Rivet Trim Clips for Bumpers Splashguards- Mitsubishi MR328954
These are a very common clip used by a lot of different Japanese and European manufacturers. They fit into an 8mm hole and are used by Mitsubishi f...
View full details
Side Skirt, Sill Moulding Cover Trim
-
8mm Push Fit Trim Clip, Mitsubishi MU488006
These 8mm plastic rivets are used on several modern Mitsubishi vehicles. The clips are a simple expanding push fit clip. The clip goes into an 8mm ...
View full details -
Mitsubishi Plastic Trim Clip- For Sill Mouldings, Side Skirts, Rocker Covers- MB361578
These are side skirt and body moulding clips fitted to a number of Mitsubishi cars. We always supply this clip with the foam sealing washer which i...
View full details -
Side Skirt & Sill Moulding Clips, Mitsubishi MU001512
Each of these clips includes a foam sealing washer. The parts are identical in specification and standard to the genuine Mitsubishi parts. These cl...
View full details
Tailgate Lining Clips and Boot Lid Lining
-
6mm Push Fit Plastic Trim Clips for Mitsubishi - MR288150, MR655523
Small 6mm push fit clips used by Mitsubishi on a wide range of models. These are one of the most common Mitsubishi clips we stock and have been fit...
View full details -
8mm Push Fit Plastic Rivet- Mitsubishi Clip MR220501
These 8mm clips are common as wheel arch lining, engine bay and bumper clips. Our parts are all produced to the exact same specifications as the or...
View full details -
Mitsubishi Door Card & Interior Panel Trim Clips- MR550882
This interior trim panel clip is widely used by Japanese manufacturers including Mitsubishi. The clips are normally used on door cards but will als...
View full details
Underbody Shields and Insulation Panel Fastener
-
8mm Push Fit Trim Clip, Mitsubishi MU488006
These 8mm plastic rivets are used on several modern Mitsubishi vehicles. The clips are a simple expanding push fit clip. The clip goes into an 8mm ...
View full details -
8mm Plastic Rivet Trim Clips for Bumpers Splashguards- Mitsubishi MR328954
These are a very common clip used by a lot of different Japanese and European manufacturers. They fit into an 8mm hole and are used by Mitsubishi f...
View full details -
8mm Push Fit Plastic Rivet- Mitsubishi Clip MR220501
These 8mm clips are common as wheel arch lining, engine bay and bumper clips. Our parts are all produced to the exact same specifications as the or...
View full details
Windscreen Cowl or Scuttle Panel
-
4mm Fir Tree Clip for Air Inlet & Windscreen Cowling, Mitsubishi MR777365
These small black plastic trim clips are used on some Mitsubishi models to attach the plastic cowling that runs along the bottom of the windscreen.