Contact Us
Mitsubishi L200 Fixings Trim Clips and Fasteners -Mk4 (2006-2014)
Below you can find a list of some of the trim clips and fasteners that we keep in stock for the Mitsubishi L200 Mk4 (2006-2014). We have tried to list the parts under subheadings which indicate the location they are used. Please note that there may be other clips used which we do not stock and which are not shown. If you need something specific for your L200 and you can't find it, just let us know and we'll try to help or suggest an alternative.
Bonnet Insulation and Soundproofing
-
Bonnet Insulation Retaining Clip / Fastener, Mitsubishi MU001282
Mitsubishi bonnet insulation clips used to hold the fabric sound proofing panels in position on the underside of the bonnet. These clips fit into a...
View full details -
Bonnet Insulation, Upholstery & Sound Deadening Clips, Mitsubishi MU481187
These simple, black button clips fit into an 8mm diameter hole. The part is used by Mitsubishi to attach insulation and upholstery panels in severa...
View full details
Bonnet Rubber Weatherstrip
-
Bonnet Rubber Weatherstrip Seal Clips, Mitsubishi MU481027
These small brown clips are used on lots of Mitsubishi models. The clip is normally used to attach the rubber seals that run along the front and re...
View full details
Front Bumper and Trim Fastener
-
9mm Push Fit Plastic Clips for Bumpers, Undertray, Sills & Grille- Mitsubishi MR200300
These 9mm push fit rivets are used on several Mitsubishi models including the Mitsubishi Lancer Evolution models 8, 9 and 10. They are used for att...
View full details -
Wheel Arch Lining, Bumper & Trim Panel Fasteners- Mitsubishi MB253964
Fitted to several Mitsubishi models, these clips are used for multiple purposes. They are found on wheel arch linings, bumpers, splashguards and in...
View full details -
9mm Hole Screw Grommet, Mitsubishi MU480033 / MU480035
These are used to mount the bumpers on several Mitsubishi models. This part fits into a hole in the metal bodywork and the plastic bumper cover is ...
View full details
Front Door Card
-
Body Moulding & Trim Panel Clips, Mitsubishi MU000588, MU000977
These short blue moulding clips are used on interior and exterior trim panels. The clips are used on several different models for parts such as pil...
View full details -
Interior Door Card & Trim Panel Retainer Clips, Mitsubishi MU000571
These plastic fasteners are used on many different Mitsubishi models from the Colt to the Pajero. They are normally white but occasionally blue or ...
View full details
Front Door Weatherstrip
-
Front & Rear Door Rubber Weatherstrip Clips, Mitsubishi MU000255
These small white clips have a canoe shaped head that fits inside a rubber door seal. The clip then clicks into position on the door frame to secur...
View full details
Front Grille or Slam Panel
-
9mm Push Fit Plastic Clips for Bumpers, Undertray, Sills & Grille- Mitsubishi MR200300
These 9mm push fit rivets are used on several Mitsubishi models including the Mitsubishi Lancer Evolution models 8, 9 and 10. They are used for att...
View full details -
Wheel Arch Lining, Bumper & Trim Panel Fasteners- Mitsubishi MB253964
Fitted to several Mitsubishi models, these clips are used for multiple purposes. They are found on wheel arch linings, bumpers, splashguards and in...
View full details
Front Wheel Arch Flare and Trim Moulding
-
Body Moulding & Trim Panel Clips, Mitsubishi MU000588, MU000977
These short blue moulding clips are used on interior and exterior trim panels. The clips are used on several different models for parts such as pil...
View full details -
Screw Mounting Grommet for 8.5x8.5mm Hole, Mitsubishi MS480003
Very widely used screw grommet that fits into a square hole measuring 8.5mm by 8.5mm. The clip is used by Mitsubishi to secure trim or parts to bod...
View full details
Front Wheel Arch Lining and Mudguard
-
6mm Push Fit Plastic Trim Clips for Mitsubishi - MR288150, MR655523
Small 6mm push fit clips used by Mitsubishi on a wide range of models. These are one of the most common Mitsubishi clips we stock and have been fit...
View full details -
Wheel Arch Lining, Bumper & Trim Panel Fasteners- Mitsubishi MB253964
Fitted to several Mitsubishi models, these clips are used for multiple purposes. They are found on wheel arch linings, bumpers, splashguards and in...
View full details -
9mm Hole Screw Grommet, Mitsubishi MU480033 / MU480035
These are used to mount the bumpers on several Mitsubishi models. This part fits into a hole in the metal bodywork and the plastic bumper cover is ...
View full details
Interior Door Sill Cover
-
Trim Panel & Moulding Clip, Mitsubishi MU000573
These small white clips are widely used on Mitsubishi vehicles. They are used to attach trim panels or moulding strips. Example uses include L200 d...
View full details
Interior Pillar Trim
-
Body Moulding & Trim Panel Clips, Mitsubishi MU000588, MU000977
These short blue moulding clips are used on interior and exterior trim panels. The clips are used on several different models for parts such as pil...
View full details -
Mitsubishi Door Card & Interior Panel Trim Clips- MR550882
This interior trim panel clip is widely used by Japanese manufacturers including Mitsubishi. The clips are normally used on door cards but will als...
View full details
Rear Wheel Arch Flares and Moulding Trim
-
Body Moulding & Trim Panel Clips, Mitsubishi MU000588, MU000977
These short blue moulding clips are used on interior and exterior trim panels. The clips are used on several different models for parts such as pil...
View full details -
Wheel Arch Lining & Flare Trim Clips, Mitsubishi MB138567
These are very common on Mitsubishi cars and pick up trucks. The plastic spire-type clips are normally around the edges of the wheel arch lining wh...
View full details -
Screw Mounting Grommet for 8.5x8.5mm Hole, Mitsubishi MS480003
Very widely used screw grommet that fits into a square hole measuring 8.5mm by 8.5mm. The clip is used by Mitsubishi to secure trim or parts to bod...
View full details
Rear Wheel Arch Lining and Mudguard
-
Wheel Arch Lining, Bumper & Trim Panel Fasteners- Mitsubishi MB253964
Fitted to several Mitsubishi models, these clips are used for multiple purposes. They are found on wheel arch linings, bumpers, splashguards and in...
View full details
Underbody Shields and Insulation Panel Fastener
-
8mm Plastic Rivet Trim Clips for Bumpers, Splashguards & Wheelarch Liner- Mitsubishi MU000319 MU000705
A standard 8mm push fit plastic rivet that is used on several models made by Mitsubishi. These plastic fasteners are used on arch linings, mudguard...
View full details -
Plastic Clip, Air Intake, Arch Linings, Trims & Shields, Mitsubishi MB115492
These small plastic clips click into a 5mm diameter hole. The clips are used to secure lightweight parts such as air intake hoses, engine bay shiel...
View full details
Windscreen Cowl or Scuttle Panel
-
4mm Fir Tree Clip for Air Inlet & Windscreen Cowling, Mitsubishi MR777365
These small black plastic trim clips are used on some Mitsubishi models to attach the plastic cowling that runs along the bottom of the windscreen.
Side Step Trim and Cover Fastener
-
6mm Push Fit Plastic Trim Clips for Mitsubishi - MR288150, MR655523
Small 6mm push fit clips used by Mitsubishi on a wide range of models. These are one of the most common Mitsubishi clips we stock and have been fit...
View full details