Contact Us
Nissan Qashqai Fixings Trim Clips and Fasteners -Mk1 J10 (2006-2013)
Below you can find a list of some of the trim clips and fasteners that we keep in stock for the Nissan Qashqai Mk1 J10 (2006-2013). We have tried to list the parts under subheadings which indicate the location they are used. Please note that there may be other clips used which we do not stock and which are not shown. If you need something specific for your Qashqai and you can't find it, just let us know and we'll try to help or suggest an alternative.
Air Intake Fastener
-
8mm Push Fit Plastic Trim Clip- Nissan 01553-09611
These short clips are normally used for fastening bumpers, grilles, sill moulding trims and radiator covers in place. The clips have a mottled fini...
View full details
Bonnet Insulation and Soundproofing
-
Bonnet Insulation Retaining Clips- Nissan 65832F5000, 6584630F00
These distinctive clips are used to hold bonnet insulation panels in place on a wide number of Nissan models. The barbed stem of the clip fits into...
View full details
Boot Carpet and Interior Lining
-
8mm Plastic Rivet Clip for Shields, Cowl and Trim, Nissan 01553-05323, 01553-05933
These clips are a high quality replacement identical to the OE parts. Nissan use these plastic push fit rivets for a variety of uses. They can be f...
View full details
Engine Bay Shield
-
8mm Trim Clip for Bumpers, Splashguards, Liners etc- Nissan 01553-09321
Very widely used clip by Nissan. Common on most models and used on bumpers, arch linings, radiator grilles, engine shields, windscreen cowls etc. T...
View full details
Engine Undertray
-
8mm Trim Clip for Bumpers, Splashguards, Liners etc- Nissan 01553-09321
Very widely used clip by Nissan. Common on most models and used on bumpers, arch linings, radiator grilles, engine shields, windscreen cowls etc. T...
View full details -
8mm Push Fit Plastic Rivet, Nissan 11296-AG000
Widely used on modern Nissan cars and vans, these clips are normally used for bumpers, grilles, undertrays and wheel arch liners. The clips are a s...
View full details -
12mm Underbody Shields & Trim Fastener Clip, Nissan 76882EY10A
These large screw fit plastic fastenings fit into a 12mm hole. They are used on some vehicles to attach underbody shields and other large plastic t...
View full details
Front Bumper and Trim Fastener
-
Plastic Trim Clips- Bumpers, Engine Shields, Linings- Nissan 0151500QAB
These clips are originally a Renault part. They are often fitted by Nissan on some of the vehicles developed jointly with Renault. They are a stron...
View full details -
10x10mm Hole Screw Grommet, Nissan 0128100111
These are standard screw grommets used for mounting trims and parts into position on the bodywork. These fit into a 10mm x 10mm square hole in the ...
View full details -
Push Fit Black Plastic Rivet, Nissan 0151500Q0C
This push fit plastic rivet is fitted to modern Nissan cars normally as a bumper, wheel arch or engine shield retainer. The clip is a simple expand...
View full details
Front Door Card
-
Trim Panel & Moulding Clips, Nissan 80999VE000
These parts are used on several Nissan models- normally to secure door cards, trims and interior pillar covers.
Front Grille or Slam Panel
-
Plastic Trim Clips- Bumpers, Engine Shields, Linings- Nissan 0151500QAB
These clips are originally a Renault part. They are often fitted by Nissan on some of the vehicles developed jointly with Renault. They are a stron...
View full details -
Push Fit Black Plastic Rivet, Nissan 0151500Q0C
This push fit plastic rivet is fitted to modern Nissan cars normally as a bumper, wheel arch or engine shield retainer. The clip is a simple expand...
View full details
Front Wheel Arch Lining and Mudguard
-
8mm Trim Clip for Bumpers, Splashguards, Liners etc- Nissan 01553-09321
Very widely used clip by Nissan. Common on most models and used on bumpers, arch linings, radiator grilles, engine shields, windscreen cowls etc. T...
View full details -
8mm Push Fit Plastic Rivet, Nissan 11296-AG000
Widely used on modern Nissan cars and vans, these clips are normally used for bumpers, grilles, undertrays and wheel arch liners. The clips are a s...
View full details
Interior Side Trim
-
Trim Panel & Moulding Clips, Nissan 80999VE000
These parts are used on several Nissan models- normally to secure door cards, trims and interior pillar covers.
Parcel Shelf Hanger
-
Parcel Shelf Hanger Clip, Nissan 79916-JD00A
These parcel shelf clips are used on modern Nissan models including some versions of the Note and Qashqai. The clip fits into a hole in the tailgat...
View full details
Radiator Surround and Air Guide Panel
-
8mm Trim Clip for Bumpers, Splashguards, Liners etc- Nissan 01553-09321
Very widely used clip by Nissan. Common on most models and used on bumpers, arch linings, radiator grilles, engine shields, windscreen cowls etc. T...
View full details
Rear Bumper and Trim Fastener
-
8mm Trim Clip for Bumpers, Splashguards, Liners etc- Nissan 01553-09321
Very widely used clip by Nissan. Common on most models and used on bumpers, arch linings, radiator grilles, engine shields, windscreen cowls etc. T...
View full details -
Bumper Clip Fasteners, Nissan 85284JD00A
These bumper bracket clips are used on some modern Nissan and Renault models. An example use is Nissan Qashqai rear bumper clips. The clips are a h...
View full details -
10x10mm Hole Screw Grommet, Nissan 0128100111
These are standard screw grommets used for mounting trims and parts into position on the bodywork. These fit into a 10mm x 10mm square hole in the ...
View full details -
Screw Grommet for Bumpers & Wings, Nissan 638465V000
This plastic mounting clip with sealing washer is normally used to join bumper covers to the front or rear wings. These clips sit in the metal body...
View full details
Rear Door Card
-
Interior Trim Panel & Lining Clips, Nissan 0155330001
One of the most common clips on modern Nissan cars and vans, this is used on many different types of interior trim. The clips are used to attach do...
View full details -
Trim Panel & Moulding Clips, Nissan 80999VE000
These parts are used on several Nissan models- normally to secure door cards, trims and interior pillar covers.
Rear Wheel Arch Lining and Mudguard
-
8mm Trim Clip for Bumpers, Splashguards, Liners etc- Nissan 01553-09321
Very widely used clip by Nissan. Common on most models and used on bumpers, arch linings, radiator grilles, engine shields, windscreen cowls etc. T...
View full details -
8mm Push Fit Plastic Rivet, Nissan 11296-AG000
Widely used on modern Nissan cars and vans, these clips are normally used for bumpers, grilles, undertrays and wheel arch liners. The clips are a s...
View full details
Tailgate Lining Clips and Boot Lid Lining
-
10x10mm Hole Screw Grommet, Nissan 0128100111
These are standard screw grommets used for mounting trims and parts into position on the bodywork. These fit into a 10mm x 10mm square hole in the ...
View full details
Windscreen Cowl or Scuttle Panel
-
8mm Trim Clip for Bumpers, Splashguards, Liners etc- Nissan 01553-09321
Very widely used clip by Nissan. Common on most models and used on bumpers, arch linings, radiator grilles, engine shields, windscreen cowls etc. T...
View full details